Honeywell Thor VM2 User Manual page 246

To use Sign-On credentials:
•
To use Stored Credentials:
•
•
To use Automatic PAC Provisioning:
•
To use manual PAC Provisioning:
•
•
Ensure the correct Active Profile is selected on the Configuration tab and restart. The
Status tab shows the device is connected.
Note: When using Automatic PAC Provisioning, once authenticated, there is a file stored in the
C:\Program Files\Laird\certs directory with the PAC credentials. If the username is
changed, that file must be deleted. The filename is autoP.00.pac.
240 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Do not enter a User and Password as the user will be prompted for the Username and
Password when connecting to the network.
Enter the Domain\Username (if the Domain is required), otherwise enter the
Username.
Enter the password.
No additional entries are required.
Enter the PAC Filename and PAC Password.
The PAC file must be copied to the directory specified in the Certs Path global
variable. The PAC file must not be read only.