Honeywell Thor VM2 User Manual page 206

This utility provides an automated process to read the configuration settings from one
Thor VM2 and then apply those settings to one or more other Thor VM2s with the same
operating system. The Configuration Cloning Utility (CCU) is installed as part of the fac-
tory software load. Configuration settings for the following items may be included:
•
•
•
The CCU allows a configuration file (ccf file) to be created by:
•
•
If desired, settings can be modified (advanced user only) before saving the ccf file. If any
changes have been made, the CCU can also apply them to the source Thor VM2.
The configuration file can then be copied and deployed to the destination Thor VM2(s).
Options include:
•
•
The Configuration Cloning Utility can be run as a GUI or command line interface.
206 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
RFTerm
EZ-Pair (Bluetooth)
Honeywell Control Panels:
◦ Screen blanking
◦ USB powered in Sleep
◦ Enable/disable touch screen
◦ COM port pin 9 +5V or RI
◦ EWF and HORM (Windows Embedded Standard 7 only).
Reading the current program settings from the source Thor VM2
Reading the default program settings from a ddf file.
Import changes only - Only those configuration settings which have been modified
from their default value are applied to the destination Thor VM2. All other settings on
the destination Thor VM2 are left unchanged.
Import changes and defaults - All configuration settings are applied to the
destination Thor VM2. If a setting was modified on the source Thor VM2 the modified
value is applied to the destination Thor VM2. Otherwise the default value is applied
for that setting on the destination Thor VM2.
Windows Embedded Standard 7 and Windows 7 Professional:
• Before attempting to import settings from RFTerm, or
open the program as an administrator and make any desired changes
before importing. These programs do not write to the system registry
until they have been opened as an administrator.
Windows Embedded Standard 2009:
• Before attempting to import settings from RFTerm, or
open the program and make any desired changes before importing.
These programs do not write to the system registry until they have been
opened.
Bluetooth EZPair,
Bluetooth EZPair,