Honeywell Thor VM2 User Manual page 179

UPS
When the Thor VM2 is operating on the UPS the timeouts from the battery section for
the selected power scheme/plan are used. By default, the timeouts for UPS are the
same for each power scheme/plan.
UPS Behavior
The Thor VM2 behavior when operating from UPS power is described below.
Thor VM2 is Off
Conditions
The Thor VM2 is Off and the power button is pressed the Thor VM2 and both the follow-
ing conditions are met:
•
•
Result
The Thor VM2 boots and follows the selected power scheme's Running on Batteries (or
power plan's On battery) timeouts with power management timers reset at boot up.
Conditions
The Thor VM2 is Off and the power button is pressed the Thor VM2 and at least one of
the following conditions are met:
•
•
Results
The Thor VM2 remains Off.
Thor VM2 is On
Conditions
The Thor VM2 is On and external power is removed, such as:
•
•
•
Result
The Thor VM2 boots and follows the selected power scheme's Running on Batteries (or
power plan's On battery) timeouts with power management timers reset at the time of
power removal. UPS charging is disabled.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
UPS power is over 10% capacity
CPU temperature is over 20ºC
UPS power is under 10% capacity
CPU temperature is under 20ºC
Thor VM2 is removed from a powered dock (Dock power switch On)
Thor VM2 is mounted to a dock and truck power is removed from the dock
Thor VM2 is mounted to a dock and the dock power switch is turned Off
179