Using Configuration Cloning Utility Gui - Honeywell Thor VM2 User Manual

3. Select Run as administrator to launch the CCU.
4. If a User Account Control message is displayed, you must allow the CCU to make

Using Configuration Cloning Utility GUI

Menu Options
File
The File menu contains information for working with the configuration files.
About
Displays version and copyright information for the Configuration Cloning Utility.
Open
Opens a configuration file. The CCU looks for configuration files in the C:\Win-
dows\DDF folder. CCU can open the following files types:
•
•
208 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
It is necessary to run the CCU as an administrator because the CCU must be
able to access and make changes to the Windows registry.
Rather than selecting to run as administrator each time, right click on the
CCU icon and select Properties. Tap the Compatibility tab and check Run
this program as an administrator. This modification affects the current user
only unless Change settings for all users is tapped before changing the priv-
ilege level.
changes to the computer.
ddf files - These files contain the factory default values for the software. These files
are placed on the Thor VM2 when the applicable software was installed or upgraded.
Use this option if you wish to start a configuration settings file based on the factory
defaults.
ccf files - These files contain the modified values for the software settings. These files
are created with the CCU . ccf files are encrypted for security. Once a ccf file is created
on one Thor VM2 it can be copied to other Thor VM2s to duplicate the configuration.