Honeywell Thor VM2 User Manual page 272

If either option is enabled, the credentials entered here take precedence over any cre-
dentials entered on the Profile tab.
To use either option, select Logon Options from the Property list which activates the
Logon Options button.
Click the Logon Options button.
Single Signon
To use the Single Signon option, select the checkbox for Use the Windows username
and password when available. When the active profile is using LEAP, PEAP-MSCHAP,
PEAP-GTC or EAP-FAST, the SCU ignores the username and password, if any, saved in
the profile. Instead, the username and password used for Windows logon is used. Any
certificates needed for authentication must still be specified in the profile.
Click OK then click Commit.
Pre-Logon Connection
To use the Pre_logon connection, select the checkbox for Enable pre-logon connection.
This option is designed to be used when:
•
•
•
Once this option is enabled, the Authentication delay and Association timeout values
can be adjusted as necessary. Both values are specified in milliseconds (ms).
266 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
EAP authentication is required for a WLAN connection
Single Signon is configured, so the Windows username and password are used as
credentials for EAP authentication
The WLAN connection needs to be established before the Windows login.