Thor Vm2 Recovery Dvd; Thor Vm2 Drivers Dvd; Thor Vm2 With No Operating System - Honeywell Thor VM2 User Manual

Thor VM2 Recovery DVD

A recovery DVD is available to restore the operating system on your Thor VM2 to the
same state it had when it was shipped from the factory. The recovery DVD may not
reload all factory installed software, but the Thor VM2
software applications. Depending on the operating system, a separate recovery DVD
may be provided for English, Traditional Chinese, Simplified Chinese, Japanese, Korean,
French, Spanish, Germain and Thai languages or some or all of these languages may be
distributed on one DVD. Contact
DVD and for assistance installing other factory loaded software.
To use the recovery DVD:
1. Attach a USB DVD drive and an external keyboard to the Thor VM2.
2. Insert the recovery DVD into the DVD drive.
3. Reboot the Thor VM2.
4. Repeatedly press the P5 key on the Thor VM2 front panel or the F5 key on the
5. When the Boot Menu is displayed, use the arrow keys on the external keyboard to
6. Follow the on-screen instructions to complete the recovery process.
7. When the process is complete, disconnect the USB DVD drive and start the Thor

Thor VM2 Drivers DVD

The drivers DVD contains drivers and software for the Thor VM2.
There is a driver installation document. Install the drivers in the order listed in this doc-
ument, rebooting when specified.

Thor VM2 with no Operating System

The Thor VM2 can be ordered with no operating system. In this case, the user must
have:
•
•
•
When prompted for driver locations during installation and setup, direct the device wiz-
ard to the drivers DVD. If desired the drivers can be copied to a different media, such as
a USB drive.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
external keyboard.
select the USB DVD drive.
VM2.
Windows 7 installation media
A valid product licensing key
Thor VM2 drivers DVD
Technical Assistance
Drivers DVD can be used to install
for information on the recovery
203