Honeywell Thor VM2 User Manual page 222

Property
BG
Channel
Set
DFS
Channels
DFS Scan
Time
Ad Hoc
Channel
Aggressiv
e Scan
CCX
Features
WMM
Auth
Server
TTLS
Inner
Method
216 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Default
Explanation
Value
Full Defines the 2.4GHz channels to be scanned for an AP when the radio is
contemplating roaming. By specifying the channels to search, roaming time
may be reduced over scanning all channels.
Options are:
Full (all channels)
1,6,11 (the most commonly used channels)
1,7,13 (for ETSI and TELEC radios only)
or Custom.
Off Support for 5GHZ 802.11a channels where support for DFS is required.
Options are: On, Off, Optimized.
Not supported (always off) in some releases.
120 ms. The amount of time the radio will passively scan each DFS channel to see if it
will receive a beacon.
Recommended value is 1.5 times that of the AP's beacon period.
1 Use this parameter when the Radio Mode profile parameter is set to Ad Hoc.
Specifies the channel to be used for an Ad Hoc connection to another client
device. If a channel is selected that is not supported by the by the radio, the
default value is used.
Options are:
1 through 14 (the 2.4GHz channels)
36, 40, 44, 48 (the UNII-1 channels)
On When set to On and the current connection to an AP weakens, the radio
aggressively scans for available APs.
Aggressive scanning works with standard scanning (set through Roam
Trigger, Roam Delta and Roam Period). Aggressive scanning should be set to
On unless there is significant co-channel interference due to overlapping
APs on the same channel.
Options are: On, Off
Optimized Use of Cisco Compatible Extensions (CCX) radio management and AP
specified maximum transmit power features.
Options are:
Full - Use Cisco IE and CCX version number, support all CCX features. The
option known as "On" in previous versions.
Optimized –Use Cisco IE and CCX version number, support all CCX features
except AP assisted roaming, AP specified maximum transmit power and
radio management.
Off - Do not use Cisco IE and CCX version number.
Cisco IE = Cisco Information Element.
Off Use of Wi-Fi Multimedia extensions.
Type 1 Specifies the type of authentication server.
Options are: Type 1 (ACS server) and Type 2 (non-ACS server)
Auto-EAP Authentication method used within the secure tunnel created by EAP-TTLS.
Options are:
AUTO-EAP (Any available EAP method), MSCHAPV2, MSCHAP, PAP
CHAP, EAP-MSCHAPV2