Connect Usb Host - Honeywell Thor VM3 User Manual

Connect USB Host

Host / Client Y Cable
D9 Connector
See
Note: The USB client connection is not available on the Thor VM3.
1. Seat the D9 connector firmly over the USB (Standard Dock) or USB1 (Enhanced
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB-host connector provides a connector for a USB device such as a USB
4. Secure the cables to the Thor VM3 with
Dual Host Y Cable
See
1. Seat the D15 connector firmly over the USB2 (Enhanced Dock only) connector on
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB-host connectors provide a connector for a USB device such as a USB
4. Secure the cables to the Thor VM3 with
112 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
USB and USB1 Connector
Dock) connector on the dock.
thumb drive.
D15 Connector
USB2 Connector for connector pinouts.
the dock.
thumb drive.
USB Host Connector
USB Client Connector
for connector pinouts.
Strain Relief Cable
USB Host Connectors
Strain Relief Cable
Clamps.
Clamps.