Server Blade - Hitachi NVM Navigator v03-07 User Manual

LPAR status
The following requirements shown in the following table must be fulfilled.
Table 2-11 Requirements of LPAR status
LPAR Status
Act (Activated)
Dea (Deactivated)
Fai (Failure)
* You must set the item for remote shutdown when you desire to execute LPAR migration in
Shutdown mode. For the setting for the remote shutdown, see "Executing migration with
automatic shutdown of source LPAR" in "Other functions and settings".
Guest OS
All guest OSs supported on an HVM on each of CB 2000, CB 500, and CB2500
can migrate in Shutdown mode.
Requirement of source and destination server blades
Management module version
You can execute LPAR migration in Shutdown mode regardless of management
module version.
Dictionary version
You can execute LPAR migration in Shutdown mode regardless of Dictionary
version.

Server blade

Location
You cannot execute LPAR migration in Shutdown mode from an LPAR number
to another within a server blade. For relation of the locations of the source and
destination server blades between which you can execute LPAR migration in
Shutdown mode, confirm the following table.
Table 2-12 Requirements of location between source and destination
server blades
Within a server blade
From a server blade to another within a server chassis
From a server blade in a chassis to another server blade in another chassis
HVM Navigator User's Guide - Migration
Location
Usage environments
Shutdown
Migratable
Yes*
Yes
No
Migratable
No
Yes
Yes
2-17