Table 2.3 Data Transfer Instructions - Hitachi H8/3062 Hardware Manual

Table 2.3 Data Transfer Instructions
Instruction Size*
MOV B/W/L
MOVFPE B
MOVTPE B
POP W/L
PUSH W/L
Note: * Size refers to the operand size.
B : Byte
W : Word
L : Longword
42
Function
(EAs) → Rd, Rs → (EAd)
Moves data between two general registers or between a general register and
memory, or moves immediate data to a general register.
(EAs) → Rd
Cannot be used in the H8/3062 Series.
Rs → (EAs)
Cannot be used in the H8/3062 Series.
@SP+ → Rn
Pops a general register from the stack. POP.W Rn is identical to MOV.W
@SP+, Rn. Similarly, POP.L ERn is identical to MOV.L @SP+, ERn.
Rn → @–SP
Pushes a general register onto the stack. PUSH.W Rn is identical to MOV.W
Rn, @–SP. Similarly, PUSH.L ERn is identical to MOV.L ERn, @–SP.