Figure 8.21 Setup Procedure For Input Capture (Example); Figure 8.22 Input Capture (Example) - Hitachi H8/3062 Hardware Manual

• Sample setup procedure for input capture
Figure 8.21 shows a sample procedure for setting up input capture.
Input selection
Select input-capture input
Start counter
Input capture

Figure 8.21 Setup Procedure for Input Capture (Example)

• Examples of input capture
Figure 8.22 illustrates input capture when the falling edge of TIOCB and both edges of TIOCA
are selected as capture edges. 16TCNT is cleared by input capture into GRB.
16TCNT value
H'0180
H'0160
H'0005
H'0000
TIOCB
TIOCA
GRA
GRB
258
1. Set TIOR to select the input capture function of a
general register and the rising edge, falling edge,
or both edges of the input capture signal. Clear the
DDR bit to 0 before making these TIOR settings.
1
2 2. Set the STR bit to 1 in TSTR to start the timer
counter.
H'0005

Figure 8.22 Input Capture (Example)

H'0160
H'0180