Debug Platform Ip Arp Inspection - Cisco Catalyst 3550 Command Reference Manual

Appendix B Catalyst 3550 Switch Debug Commands

debug platform ip arp inspection

Use the debug platform ip arp inspection privileged EXEC command to debug dynamic Address
Resolution Protocol (ARP) inspection events. Use the no form of this command to disable debugging.
Syntax Description
all
error
event
packet
rpc
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEA
Usage Guidelines
The undebug platform ip arp inspection command is the same as the no debug platform ip arp
inspection command.
Related Commands Command
show ip arp inspection
show debugging
OL-8566-02
debug platform ip arp inspection {all | error | event | packet | rpc}
no debug platform ip arp inspection {all | error | event | packet | rpc}
Display all dynamic ARP inspection debug messages.
Display dynamic ARP inspection error debug messages.
Display dynamic ARP inspection event debug messages.
Display dynamic ARP inspection packet-related debug messages.
Display dynamic ARP inspection remote procedure call (RPC) request debug
messages.
Modification
This command was introduced.
Description
Displays the dynamic ARP inspection configuration and operating state.
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
debug platform ip arp inspection
Catalyst 3550 Multilayer Switch Command Reference
B-31