Crankshaft Pulley Removal And Installation - Honda 2002 Accord Manual

Cylinder Head
Crankshaft Pulley Removal and Installation
Special Tools Required
• Holder Handle 07JAB-001020A
• Holder Attachment, 50 mm, Offset 07MAB-PY3010A
• Socket, 19 mm 07JAA-001020A
or a commercially available 19 mm socket
Removal
1. Hold the pulley with holder handle (A) and holder
attachment (B).
0 7 M A B - P Y 3 0 1 0 A
0 7 J A A - 0 0 1 0 2 0 A
(or Commercially available)
2. Remove the bolt with a heavy duty 19 mm socket
(C) and breaker bar.
2. Install the crankshaft pulley, and hold with holder
handle (A) and holder attachment (B).
0 7 J A B - 0 0 1 0 2 0 A
0 7 J A A - 0 0 1 0 2 0 A
(or Commercially available)
3. Tighten the bolt to 245 N m (25.0 kgfm, 181 Ib-ft)
with a torque wrench and 19 mm socket (C). Do not
use an impact wrench.
Installation
1. Clean the pulleys (A), crankshaft (B), bolt (C), and
washer (D). Lubricate as shown below.
O: Clean
• : Lubricate
^ A
A
6-18