Manual Transmission
Countershaft Disassembly
1. Securely clamp the countershaft assembly in a
bench vise with wood blocks.
A
2. Use a chisel (A) to raise the locknut tab (B) from the
groove in the countershaft.
3. Remove the locknut (A) and the spring washer (B).
B
A
4. Support 4th gear (A) on steel blocks <B), then use a
press (C) and an attachment (D) to press the
countershaft (E) out of the ball bearing (F).
5. Remove the friction damper (A) from the spacer (B)
using a press (C) and a socket (D) as shown.
• /
/ / /
/ /
/
13-34