Ckp/Tdc Sensors Replacement - Honda 2002 Accord Manual

CKP/TDC Sensors Replacement
7. Tighten the bolts in t w o or three steps. In the final
step, tighten all bolts, in sequence, to 9.8 N m (1.0
kgf-m, 7.2 I b f f t ) .
© ©
V f'O o O [Q'oO'J^
® ®
8. Check that all tubes, hoses and connectors are
installed correctly.
9. After assembly, wait at least 30 minutes before
filling the engine with oil.
10. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
1. Remove the balancer belt (see page 6-23).
2. Remove the balancer belt drive pulley.
3. Disconnect the CKP/TDC sensors connector (A),
then remove the CKP/TDC sensors (B).
A
6 x 1.0 m m
1 2 N m (1.2 k g f m ,
8.7 I b f f t )
4. Install the CKP/TDC sensors in reverse order of
removal.
5. Install the balancer belt (see page 6-26).
6-55