Rear Door Glass, Quarter Glass, And Regulator Replacement - Honda 2002 Accord Manual

Doors
Rear Door Latch Replacement
(cont'd)
6. With a shop towel (A) to protect the outer handle
opening, remove the latch (B) through the outer
handle opening.
B
A
7. Remove the inner handle rod (A) and lock rod (B)
from the rod holder (C), and remove the lock crank
(D) from the door.
A
C
B D
8. Install the latch in the reverse order of removal, and
note these items:
• Make sure the connectors are plugged in
properly, and each rod is connected securely.
• Make sure the door locks and opens properly.
Rear Door Glass, Quarter Glass, and
Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove these items:
• Door panel (see page 20-17)
• Pull pocket bracket (see page 20-6)
• Plastic cover (see page 20-6)
• Rod protector (see page 20-6)
2. Carefully move the glass (A) until you can see the
bolts, then loosen them. Slide the guide (B) to the
rear, then remove the glass from the guide, and
carefully lower the glass. Take care not to drop the
glass inside the door.
F a s t e n e r L o c a t i o n s
•
: Bolt, 2
20-22