Table of Contents
Advertisement
Shift Cable Replacement
1. Raise the front of the vehicle, and make sure it is
securely supported (see page 1-17).
2. Set the parking brake, and block the rear wheels
securely.
3. Shift the transmission into E position.
4. Remove the console panel (see page 20-83).
5. Remove the nut securing the shift cable end (A),
then separate the shift cable end from the shift
lever assembly.
6. Rotate the socket holder (A) on the shift cable (B)
counterclockwise a quarter turn, then slide the
holder to remove the shift cable from the shift lever
bracket base (C).
NOTE: Do not remove the shift cable by twisting
the shift cable guide pipe (D).
C
7. Remove the floor heat shield.
8. Remove the shift cable guide bracket (A) and
grommet (B).
9. Remove the bolts securing the shift cable holder (A),
then remove the shift cable cover (B).
NOTE: To prevent damage to the control lever joint,
remove the bolts securing the shift cable holder
before removing the bolts securing the shift cable
cover.
A
D
10. Remove the lock bolt (C) securing the control lever
(D), then remove the shift cable (E) with the control
lever.
(cont'd)
14-131
Advertisement
Table of Contents
Troubleshooting
