S R S
SRS Indicator Light Circuit Troubleshooting - '98-99 Models
The S R S Indicator Light Doesn't Come On
1. Turn the ignition switch ON (II), and check to see if
the other indicator lights come on (brake system,
etc).
Do the other indicator
lights come on?
Y E S - G o to step 5.
N O - G o t o step 2.
2. Check the No. 9 (7.5A) fuse in the driver's under-
dash fuse/relay box.
Is the fuse
OK?
Y E S - G o to step 4.
N O - G o to step 3.
3. Replace the No. 9 (7.5A) fuse, and check to see if
the S R S indicator light comes on.
Does the SRS indicator
light come on?
Y E S - T h e system is O K . B
N O - G o t o step 4.
4. Check for an open in the wire harness between fuse
No. 9 (7.5A) and the gauge assembly, and repair.
Check that the S R S indicator light comes on.
Does the SRS indicator
light come on?
Y E S - T h e system is O K . B
N O - G o t o step 5.
5. Turn the ignition switch OFF.
6. Remove the gauge assembly.
7. Check for a blown S R S indicator bulb.
Is the SRS indicator
bulb OK?
Y E S - G o to step 9.
N O - G o t o step 8.
8. Replace the bulb, and reconnect the gauge
assembly connectors. Then turn the ignition switch
ON (II).
Does the SRS indicator
light come on?
Y E S - T h e system is O K . B
N O - G o t o step 9.
9. Turn the ignition switch OFF, and disconnect gauge
assembly connector C (16P) from the gauge
assembly.
10. Connect a voltmeter between the No. 9 terminal of
the 16P connector and body ground.
G A U G E A S S E M B L Y C O N N E C T O R C (16P)
1
2
3
4
5
6
7
8
9
10 11
X
12
14 15 16
W i r e s i d e o f f e m a l e
t e r m i n a l s .
23-242