3Rd Clutch Pressure Switch Replacement - Honda 2002 Accord Manual

Automatic Transmission
2nd Clutch Pressure Switch (01-02
Models) Replacement (cont'd)
7. Install the rear stiffener (A), then tighten the 10 x
1.25 m m bolt (B) to the specified torque.
B
1 0 x 1 . 2 5 m m C
44 N-m 8 x 1 . 2 5 m m
(4.5 k g f m , 33 Ibf-ft) 26 N m
(4.5 k g f m , 33 Ibf ft)
8. Secure the nut (C) by your hand until it contacts the
stiffener, then tighten it to the specified torque. If
you can not tighten the nut to the stiffener surface
by hand, replace the nut and the special bolt (D).
9. Reconnect the connector, making sure there is no
water, oil, dust, or other foreign particles inside it.
10. Install the rear mount bracket, and loosely tighten
the rear mount nut.
11. Install the rear mount bracket bolts.
12. Tighten the rear mount nut to the specified torque.
3rd Clutch Pressure Switch
Replacement
1. Disconnect the connector from the 3rd clutch
pressure switch.
20 N m (2.0 kgfm, 14 Ibf ft)
2. Replace the 3rd clutch pressure switch, then install
a new one with a new sealing washer. Tighten the
switch on the metal part, not the plastic part.
3. Reconnect the connector, making sure there is no
water, oil, dust, or other foreign particles inside it.
14-112