Moonroof Position Switch Adjustment - Honda 2002 Accord Manual

Moonroof
Position Switch Adjustment
1. Remove the headliner (see page 20-79).
2. With the moonroof wrench, close the glass (A) fully:
• Make sure both link lifters (B) are parallel, and in the position shown.
• Check the glass fit to the roof panel and the glass height (see page 20-62).
C
6
K
1.0 m m
9.8 N m (1.0 k g f m , 7.2 Ibfft)
3. With an open-end wrench, loosen the position switch mounting bolts (C).
4. Adjust the position switch ( D ) :
• Move the switch a little at a time, then secure it at the position where you hear a faint click when the switch cam
(E) pushes the open/close switch ( F ) .
• Check that the switch contacts the switch bracket (G).
5. Check the operation of the glass (from the tilt-up position to the fully closed position, and from the fully open
position to the fully closed position) by operating the moonroof switch.
20-70