Table of Contents
Advertisement
Timing Belt Inspection
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset button.
2. Disconnect the battery negative terminal first, then
the positive terminal.
3. Disconnect the alternator wire harness.
-1 Pull up the lock (A), then release the wire
harness tie (B).
- 2 Pull back the boot and remove the 6 mm nut
(C).
- 3 Disconnect the connector (D) from the
alternator.
4. Remove the cylinder head cover.
5. Remove the upper cover.
6. Inspect the timing belt for cracks and oil or coolant
soaking. Replace the belt if it is oil or coolant
soaked. Remove any oil or solvent that gets on the
belt.
7. After inspecting, retorque the crankshaft pulley bolt
to 245 N m (25.0 k g f m , 181 Ibfft).
8. Reinstall all removed parts.
9. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
6-19
Advertisement
Table of Contents
Troubleshooting
