Fuel Tube/Quick-Connect Fittings Installation - Honda 2002 Accord Manual

6. Check the contact area (A) of the line (B) for dirt and
damage.
• If the surface is dirty, clean it.
• If the surface is rusty or damaged, replace the
fuel pump, fuel filter, fuel feed line and fuel
return line.
B
7. To prevent damage and keep foreign matter out,
cover the disconnected connector and line end with
plastic bags (A).
NOTE:
• The retainer cannot be reused once it has been
removed from the line.
Replace the retainer when
- replacing the fuel pump.
- replacing the fuel filter.
- replacing the fuel feed line.
- replacing the fuel return line.
- it has been removed from the line.
- it is damaged.
Fuel Tube/Quick-Connect Fittings
Installation
1. Check the contact area (A) of the line (B) for dirt or
damage, and clean it if necessary.
2. Insert a new retainer (A) into the connector (B) if the
retainer is damaged, or after
• replacing the fuel pump.
• replacing the fuel filter.
• replacing the fuel feed line.
• replacing the fuel return line.
• removing the retainer from the line.
(cont'd)
1 1 - 1 2 1