Torque Converter Clutch Solenoid Valve - Shift Solenoid Valve A Test; Shift Solenoid Valve A Replacement - Honda 2002 Accord Manual

Automatic Transmission
Torque Converter Clutch Solenoid
Valve - Shift Solenoid Valve A Test
1. Disconnect the torque converter clutch solenoid
valve/shift solenoid valve A 2P connector.
2. Measure the resistance of the torque converter
clutch solenoid valve between the No. 1 terminal of
the 2P connector and body ground.
STANDARD: 12—25 Q
3. Measure the resistance of the shift solenoid valve A
between the No. 2 terminal of the 2P connector and
body ground.
STANDARD: 1 2 - 2 5 Q
4. Replace the torque converter clutch solenoid valve/
shift solenoid valve A if either resistance is out of
specification.
5. If the resistance is within the standard, connect the
No. 1 terminal of the 2P connector to the battery
positive terminal. A clicking sound should be heard.
Connect the No. 2 terminal to the battery positive
terminal. A clicking sound should be heard.
Replace the torque converter clutch solenoid valve/
shift solenoid valve A if no sound is heard when
connecting either terminal to the battery positive
terminal.
Torque Converter Clutch Solenoid
Valve - Shift Solenoid Valve A
Replacement
NOTE: Torque converter clutch solenoid valve-shift
solenoid valve A must be removed/replaced as an
assembly.
1. Remove the mounting bolts and torque converter
clutch solenoid valve-shift solenoid valve A.
2. Clean the mounting surface and fluid passage of
the torque converter clutch solenoid valve-shift
solenoid valve A, and install a new torque
converter clutch solenoid valve-shift solenoid valve
A with a new filter/gasket (B).
3. Install the bolts with the connector bracket (C) and
the harness clamp bracket (D), and tighten the bolts.
4. Check the connector for rust, dirt, or oil, then
reconnect the connector securely.
14-106