Driveline/Axle
Intermediate Shaft Disassembly
Special Tools Required
• Driver, 07749-0010000
• Driver attachment, 07947-6340500
• Support base attachment, 07LAF-SM40300
• Support base, 07965-SD90100
• Attachment, 42 x 47 mm, 07746-0010300
1. Remove the intermediate shaft outer seal (A) from
the bearing support (B).
2. Remove the external snap ring (C).
3. Press the intermediate shaft (A) out of the
intermediate shaft bearing (B) using the special
tools and a press. Be careful not to damage the
metal rings (C) on the intermediate shaft during
disassembly.
4. Remove the internal snap ring.
16-22