Countershaft Assembly Clearance Inspection - Honda 2002 Accord Manual

Manual Transmission
Countershaft Assembly Clearance Inspection
1. Measure the clearance between the 1st gear (A)
and the thrust washer (B) with a feeler gauge (C). If
the clearance is more than the service limit, go to
step 2.
Standard: 0.06 - 0.23 mm (0.002
Service Limit: 0.23 mm (0.009 in.)
0.009 in.)
2. Measure the thickness of the thrust washer.
• If the thickness is less than the standard, replace
the thrust washer with a new one.
• If the thickness is within the standard, go to step
3.
Standard: 1.95-1.97 mm (0.077-0.078 in.)
3. Measure the thickness of the 1 st gear.
• If the thickness of 1st gear is less than the
standard, replace 1st gear with a new one.
• If the thickness of 1st gear is within the standard,
replace the 1st/2nd synchro hub with a new one.
Standard: 32.95-33.00 mm (1.297 - 1 . 2 9 9 in.)
13-32