Honda 2002 Accord Manual page 501

3®
14. Install the front transmission hanger (A) and the
rear transmission hanger (B), then tighten the bolts
in a crisscross pattern in several steps.
8 x 1.25 m m bolts: 27 N-m (2.8 k g f m , 20 Ibf ft)
10 x 1.25 m m bolts: 47 N m (4.8 k g f m , 35 Ibfft)
© © : 8 x 5 0 m m b o l t s
O t h e r : 8 x 4 0 m m b o l t s
15. install the 5/16 in steel balls ( A ) , 26 mm (1.02 in.)
length springs (B), washers (C) and setting screws
(D).
(4.5 k g f m , 3 3 I b f f t )
16. Install the reverse idler gear shaft bolt (E) with a
new washer (F).
17. Install the shift arm cover assembly (see page 13-
18).
18. Shift the transmission through all the gears before
installing it.
1 3 - 5 1