Figure 33. Removing the 2U cable wall bracket
a.
Slide the 2U cable wall bracket towards the large openings of the two keyholes to release it.
b.
Lift the 2U cable wall bracket up from the 1U cable wall bracket.
After you finish
1. Install a 2U cable wall bracket. See
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the cable wall bracket
Follow instructions in this section to install the 2U cable wall bracket.
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
Procedure
ThinkSystem SR665 V3 User Guide
76
"Install the cable wall bracket" on page
and
"Safety inspection checklist" on page 48
62.
76.
to ensure that you