Front Drive Backplane Replacement; Remove The Front 2.5-Inch Drive Backplane - Lenovo ThinkSystem SR665 V3 User Manual
Hide thumbs
Also See for ThinkSystem SR665 V3:
- System configuration manual (80 pages) ,
- User manual (256 pages)
Table of Contents
Advertisement
Figure 68. Installing the front adapter assembly
a.
Insert the front adapter assembly into the front chassis.
b.
Install the screws to secure the front adapter assembly in place.
Step 6.
Connect the cables to the system board assembly and the rear OCP interposer card. See
6 "Internal cable routing" on page
Step 7.
Install the system fan cage. See
Step 8.
Install system fans. See
Step 9.
Install the riser 1 assembly if you have removed it. See
After you finish
Complete the parts replacement. See
Front drive backplane replacement
Follow instructions in this section to remove and install a front drive backplane.
•
"Remove the front 2.5-inch drive backplane" on page 110
•
"Install the front 2.5-inch drive backplane" on page 113
•
"Remove the front 3.5-inch drive backplane" on page 116
•
"Install the front 3.5-inch drive backplane" on page 118
Remove the front 2.5-inch drive backplane
Follow instructions in this section to remove the front 2.5-inch drive backplane.
ThinkSystem SR665 V3 User Guide
110
281.
"Install the system fan cage" on page
"Install a system fan" on page
"Complete the parts replacement" on page
270.
266.
"Install a rear riser assembly" on page
279.
Chapter
242.
Advertisement
Table of Contents
