Lenovo ThinkSystem SR665 V3 User Manual page 222
Hide thumbs
Also See for ThinkSystem SR665 V3:
- System configuration manual (80 pages) ,
- User manual (256 pages)
Table of Contents
Advertisement
Figure 177. Installing the 7mm drive cage to the riser assembly
a.
Align the left-side pin on the 7mm drive cage with the positioning slot on the securing clip,
the two holes on the side brackets of the 7mm drive cage with the two holes on the front of the
riser cage. Install the 7mm drive cage to the riser assembly.
b.
Install the two screws to secure the 7mm drive cage in place.
Step 3.
Install the 7mm riser assembly to the chassis.
• 2FH+7mm SSD riser cage
Figure 178. Installing the 2FH+7mm SSD riser cage
a.
Align the riser assembly with the slot on the system board assembly, and lower and insert
the riser into the riser slot.
b.
Tighten the screw to secure the riser assembly in place.
• 7mm SSD riser cage
ThinkSystem SR665 V3 User Guide
212
Advertisement
Table of Contents
