Front I/O Connectors - Lenovo ThinkSystem SR665 V3 User Manual

Front I/O connectors

This section provides cable routing information for the front I/O connectors, including the VGA connector,
external diagnostics connector, front operator panel connectors, and front USB connector.
• "Front I/O connectors on rack latches" on page 289
• "Front I/O connectors on the media bay" on page 289
Front I/O connectors on rack latches
Note: When routing a cable on the rack latch, ensure that it is fixed on the upper frame of the cable retainer.
For details, refer to "Install the rack latches" on page
Figure 264. Front VGA connector and external diagnostics
connector (left rack latch)
From
VGA cable
1
External diagnostics
2
cable
Front I/O connectors on the media bay
The illustration shows the cable routing for the front operator panel and front USB connectors on the media
bay.
To
VGA connector on the
1
system board assembly
External diagnostics
2
connector on the system
board assembly
187.
Figure 265. Front operator panel and USB connectors
(right rack latch)
From
Front operator panel and
1
USB cable
Chapter 6
To
FIO and USB connectors
1
on the system board
assembly
.
Internal cable routing
289