b.
Slide the front I/O module out of the front chassis.
Step 4.
(Optional) If you are replacing the integrated diagnostics panel, remove the diagnostics panel from
the front I/O module.
Figure 79. Removing the integrated diagnostics panel
a.
Press down the clips as shown.
b.
Pull the diagnostics panel by its handle to get it out of its assembly.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the front I/O module
Follow instructions in this section to install the front I/O module.
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
and
"Safety inspection checklist" on page 48
62.
.
Chapter 5
Hardware replacement procedures
to ensure that you
123