Watch the procedure on YouTube (3.5-inch)
Power supply unit replacement
Follow instructions in this section to remove and install a power supply unit.
•
"Remove a power supply unit" on page 170
•
"Install a power supply unit" on page 172
Safety precautions
The section lists safety precautions that apply to AC and DC power supply units respectively. Understand
and apply the safety precautions before removing or installing a power supply unit.
Safety precautions for AC power supplies
The following tips describe the information that you must consider when you replace an AC power supply.
S035
CAUTION:
Never remove the cover on a power supply or any part that has this label attached. Hazardous voltage, current,
and energy levels are present inside any component that has this label attached. There are no serviceable parts
inside these components. If you suspect a problem with one of these parts, contact a service technician.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the electrical
current supplied to the device. The device also might have more than one power cord. To remove all electrical
current from the device, ensure that all power cords are disconnected from the power source.
ThinkSystem SR665 V3 User Guide
168