Lenovo ThinkSystem SR665 V3 User Manual page 150

Procedure
Step 1. Make preparation for the task.
a. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the
top cover, or remove the server from the rack. See
b. Remove the top cover. See
c. Remove the system fans from the fan cage. See
d. Remove the fan cage from the system board assembly. See
page 269.
Step 2. Rotate the fan cage by 90 degrees in the direction shown in the picture.
Figure 97. Rotating the fan cage
Step 3. Remove the intrusion switch assembly from the fan cage.
Figure 98. Removing the intrusion switch
ThinkSystem SR665 V3 User Guide
140
"Remove the server from rack" on page
"Remove the top cover" on page
"Remove a system fan" on page
277.
264.
"Remove the system fan cage" on
63.