Lenovo ThinkSystem SR665 V3 User Manual page 290

2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information
for each component.
3. Reinstall the air baffle if you have removed it. See
Attention: For proper cooling and airflow, reinstall the air baffle before you turn on the server. Operating
the server with the air baffle removed might damage server components.
4. Reinstall the top cover. See
5. If the sever was installed in a rack, reinstall the server into the rack. See
page 66.
6. Reconnect the power cords and any cables that you removed.
7. Power on the server and any peripheral devices. See
8. Update the server configuration.
• Download and install the latest device drivers:
• Update the system firmware. See
• Update the UEFI configuration. See
• Reconfigure the disk arrays if you have installed or removed a hot-swap drive or a RAID adapter. See
https://pubs.lenovo.com/lxpm-overview/
ThinkSystem SR665 V3 User Guide
280
"Install the air baffle" on page
"Install the top cover" on page
http://datacentersupport.lenovo.com
"Update the firmware" on page
https://pubs.lenovo.com/uefi-overview/
for the LXPM documentation compatible with your server.
278.
"Install the server to rack" on
"Power on the server" on page
467.
.
72.
61.
.