Remove A Rear Riser Assembly - Lenovo ThinkSystem SR665 V3 User Manual

Table 26. Riser cages (continued)
Server Riser 1 cage
configuration
• 3-slot riser cage
Configuration with 12
PCIe slots
• 3-slot riser cage
Configuration with a
4 x 2.5-inch rear
drive cage
• 3-slot riser cage
Configuration with an
8 x 2.5-inch rear
drive cage
• 3-slot riser cage
Configuration with a
2 x 3.5-inch rear
drive cage
• 1-slot riser cage
Configuration with a
4 x 3.5-inch rear
drive cage

Remove a rear riser assembly

Follow instructions in this section to remove a rear riser assembly.
About this task
The server supports different types of riser cages (see
the 3FH riser 1 cage and Gen 4 riser 3 cage as an example for illustration. The replacement procedure is the
same for other riser cages.
Attention:
ThinkSystem SR665 V3 User Guide
232
Riser 2 cage Riser 3 cage or 4LP
riser 3/4 cage
• 3-slot riser cage • 4LP riser 3/4 cage
LP: low profile
N/A
• 3-slot riser cage
N/A
• 1-slot riser cage
N/A
• 1-slot riser cage
N/A
• 1-slot riser cage
Table 26 "Riser cages" on page
Riser 5 cage
• Riser 5 cage
N/A
N/A
N/A
N/A
231). This topic uses