Replacement; Remove The 7Mm Drive Cage - Lenovo ThinkSystem SR665 V3 User Manual

After you finish
1. Install a rear drive cage or riser assemblies.
• "Rear PCIe adapter and riser assembly replacement" on page 231
• "Rear drive backplane and drive cage replacement" on page 213
2. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube
Rear 7mm drive backplane and drive cage replacement
Follow instructions in this section to remove and install the rear 7mm drive backplanes and drive cage.
Depending on server configuration, the server supports one of the below rear 7mm drive cages. The
replacement procedures for both drive cages and drive backplanes are similar. For 7mm drive cage
installation rules, see "PCIe slots and PCIe adapters" on page
2FH+7mm SSD riser cage
1
• "Remove the 7mm drive cage" on page 205
• "Remove the 7mm drive backplanes" on page 207
• "Install the 7mm drive backplanes" on page 209
• "Install the 7mm drive cage" on page 211

Remove the 7mm drive cage

Follow instructions in this section to remove the 7mm drive cage.
About this task
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
"Complete the parts replacement" on page
2
and "Safety inspection checklist" on page 48
62.
54.
7mm SSD riser cage
.
Chapter 5 Hardware replacement procedures
279.
to ensure that you
205