Processor interconnection cable routing
This section provides cable routing information for processor interconnection.
The following configurations do not support the processor interconnection cable:
• configurations with only one processor
• configurations with pure SAS/SATA front backplanes
Figure 292. Processor interconnection cable
From
PCIe connectors 3 and 4 on the system board
1
assembly
Note: Make sure that the cable is routed behind rubber
place.
To
PCIe connectors 2 and 1 on the system board
1
assembly
. Otherwise, the fan cage cannot be installed in
1
Chapter 6
.
Internal cable routing
311