One 8 X Sas/Sata Backplane - Lenovo ThinkSystem SR665 V3 User Manual

Power connector on
2
backplane 2
Power connector on
2
backplane 3
Signal cable connections
Refer to the specific topic for signal cable connections depending on the backplanes you have installed.
• One front backplane:
– "One 8 x SAS/SATA backplane" on page 313
– "One 8 x AnyBay backplane" on page 316
– "One 8 x NVMe backplane" on page 327
• Two front backplanes:
– "Two 8 x SAS/SATA backplanes" on page 330
– "Two 8 x AnyBay backplanes" on page 339
– "Two 8 x NVMe backplanes" on page 341
– "One 8 x SAS/SATA and one 8 x AnyBay backplanes" on page 343
– "One 8 x AnyBay and one 8 x NVMe backplanes" on page 359
• Three front backplanes:
– "Three 8 x SAS/SATA backplanes" on page 362
– "Three 8 x AnyBay backplanes" on page 401
– "Three 8 x NVMe backplanes" on page 403
– "One 8 x AnyBay and two 8 x NVMe backplanes" on page 408
– "One 8 x SAS/SATA and two 8 x NVMe backplanes" on page 413
– "Two 8 x SAS/SATA and one 8 x AnyBay (Gen 4) backplanes" on page 415
– "Two 8 x SAS/SATA and one 8 x AnyBay (Gen 5) backplanes" on page 418
– "Two 8 x SAS/SATA and one 8 x NVMe (Gen 4) backplanes" on page 421
– "Two 8 x SAS/SATA and one 8 x NVMe (Gen 5) backplanes" on page 426
– "24 x 2.5-inch SAS/SATA expander backplane" on page 431

One 8 x SAS/SATA backplane

This section provides cable routing information for the server model with one 8 x 2.5-inch SAS/SATA front
backplane.
To connect power cables for the front backplane(s), refer to
drive bays" on page 312.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
• "Onboard connectors" on page 314
• "8i/16i RAID/HBA adapter" on page 314
• "CFF 8i/16i RAID/HBA adapter" on page 315
Onboard: backplane 2
2
power connector
Onboard: backplane 3
3
power connector
Power connector 2 on
2
backplane
"Backplanes: server models with 2.5-inch front
Chapter 6
Onboard: backplane 2
2
power connector
.
Internal cable routing
313