Lenovo ThinkSystem SR665 V3 User Manual page 209

Step 3. Press the latch as shown and close the handle.
Figure 161. Closing the handle of the middle drive cage
Step 4. Install the rubber onto the cover of the supercap holder.
Figure 162. Installing the rubber
Step 5. Connect the RAID flash power module to an adapter with the extension cable that comes with the
RAID flash power module. See
After you finish
Complete the parts replacement. See
Chapter 6 "Internal cable routing" on page
"Complete the parts replacement" on page
281.
279.
.
Chapter 5 Hardware replacement procedures
199