Rear Ocp Module Replacement; Remove The Rear Ocp Module - Lenovo ThinkSystem SR665 V3 User Manual

Figure 196. Installing the top cover support bracket
After you finish
1. Reinstall the drives or drive fillers into the rear drive cage. See
2. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube

Rear OCP module replacement

Follow instructions in this section to remove and install the rear OCP module.
• "Remove the rear OCP module" on page 228
• "Install the rear OCP module" on page 229

Remove the rear OCP module

Follow instructions in this section to remove the rear OCP module.
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
ThinkSystem SR665 V3 User Guide
228
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 48
62.
"Install a hot-swap drive" on page
279.
134.
to ensure that you