Figure 220. Installing the riser 3/4 assembly
Step 2.
Connect cables to the riser card and PCIe adapter. See
281.
After you finish
Complete the parts replacement. See
Demo video
Watch the procedure on YouTube
Security bezel replacement
Follow instructions in this section to remove and install the security bezel.
•
"Remove the security bezel" on page 245
•
"Install the security bezel" on page 246
Remove the security bezel
Follow instructions in this section to remove the security bezel.
About this task
Attention: Read
"Installation Guidelines" on page 47
that you work safely.
Procedure
"Complete the parts replacement" on page
and
"Safety inspection checklist" on page 48
Chapter 6 "Internal cable routing" on page
279.
.
Chapter 5
Hardware replacement procedures
to ensure
245