Figure 425. SAS/SATA cable routing to 8i/16i Trimode adapters
From
Backplane 1: SAS
1
Backplane 2: SAS
2
Backplane 3: SAS
3
Three 8 x NVMe backplanes
This section provides cable routing information for the server model with three 8 x 2.5-inch NVMe front
backplanes.
To connect power cables for the front backplane(s), refer to
drive bays" on page
312.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"Front backplanes: 24 x NVMe" on page 403
•
"Front + middle backplanes: 24 x NVMe + 8 x NVMe" on page 406
Front backplanes: 24 x NVMe
This topic provides cable routing information for the server model with three 8 x 2.5-inch NVMe front
backplanes.
To
16i adapter: C0
1
16i adapter: C1
2
8i adapter: C0
3
"Backplanes: server models with 2.5-inch front
Chapter 6
.
Internal cable routing
403