Table of Contents
Advertisement
https://pubs.lenovo.com/st650-v2/thinksystem_l_shaped_rail_kit.pdf
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the chassis to the rack
Follow instructions in this section to install the chassis to the rack.
About this task
To avoid potential danger, make sure to read and follow the safety information.
R006
CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.
Attention:
• Read
"Installation Guidelines" on page 15
you work safely.
• To install the rails into a rack, follow the instructions below:
https://pubs.lenovo.com/st650-v2/thinksystem_l_shaped_rail_kit.pdf
After the rails are installed successfully, complete the following steps to install the chassis to the rack.
CAUTION:
Use safe practices when lifting the chassis.
Procedure
Step 1.
Make preparations for this task.
a.
If the EIA brackets are not installed to the front of the chassis yet, install them (see
EIA brackets to the chassis" on page
Step 2.
Align the chassis with the rails; then, slide the chassis into the rack.
Step 3.
Tighten the captive screws on the front to secure the chassis to the rack.
22
ThinkSystem D3 Chassis User Guide
and
"Safety inspection checklist" on page 16
26).
to make sure that
"Install the
Advertisement
Table of Contents
