Mitsubishi Electric MELSEC iQ-R Series User Manual page 634

Detailed Item
information
Detailed Communication speed and communication
information 2 mode
Communication status
Security key operation information
Remote password information
File password information
Blocked IP address information
Drive/file information
Drive number and file name
Copy source drive/file information
Operation target information
Clock information (before change)
Remote operation type information
File access control information
Program start information
Program stop information
System configuration information
Target folder information of the CPU module
data backup/restoration function
System A/B setting information
System switching information
Control system start-up cause information
Error description (the other system)
Cause of tracking communication stop
Target station information
Firmware update information
Restricted event category
Detailed Clock information (after change)
information 3
Copy destination drive/file information
37 EVENT LIST
632
37.1 How to Read the Event List
Description
Information on the communication speed and the communication mode
Information on the communication status
Information on the corresponding security key
Information on the corresponding remote password
Information on the corresponding file password
Information on the blocked IP address
Information on the corresponding drive name and file name
Information on the corresponding drive number and file name
Information on the corresponding drive name and file name
Information on the operation target: I/O number
Clock information before change
Information on the remote operation type
Information on file access control: access level
Information on the start of a specified program
Information on the stop of a specified program
Information on the system configuration
Information on the data backup/restoration target folder (folder specification, date,
number)
Information on the system A/B setting
Information on the system switching cause, the cause of system switching failure, and
the transition state of the systems (control system and standby system)
Information on the start-up cause of the control system
Description of the error when an error was detected in the other system
Cause of tracking communication stop
Error description (error codes) of target station
Information (firmware versions before and after update, modules whose firmware
versions are updated) on the firmware update that is performed using the engineering
tool
Category of event subject to the event history logging restriction
Clock information after change
Information on the corresponding drive name and file name