Mitsubishi Electric MELSEC iQ-R Series User Manual page 154

*7 This file name depends on the connection type of the iQ Sensor Solution data backup/restoration function. For the file name, refer to the
following.
 iQ Sensor Solution Reference Manual
*8 The parameter cannot be written to the CPU modules on other stations via MELSECNET/H of the Q series.
*9 In the redundant extension base configuration, the module extension parameter used by the module on the extension base unit must be
stored in the intelligent function module. If the parameter is stored in the CPU module, an error occurs when the module is turned on or
the module status is switched from STOP to RUN.
Before writing the module extension parameter to the intelligent function module, set the CPU module to redundant mode.
*10 The parameter cannot be stored in the redundant extension base unit configuration.
*11 The location where the module-specific backup parameter file is stored varies depending on the set value of "Setting of File/Data Use or
Not in Memory Card" of the memory card parameter.
 "Module Extended Parameter" is set to "Not Use" (default): Data memory
 "Module Extended Parameter" is set to "Use": SD memory card
10 MEMORY CONFIGURATION OF THE CPU MODULE
152
10.4 Files