Mitsubishi Electric MELSEC iQ-R Series User Manual page 293

Auto logging common setting
The following window configures the required settings for using the auto logging function.
Window
Displayed items
Item
Enable the auto logging function
Auto logging Data logging stop
terminate
condition
Timer Complete with
timer
Elapsed time
Description
Select this item to use auto logging.
Select the condition to complete the auto logging
operation. ( Page 292 Conditions for auto
logging completion)
Select this checkbox to stop the auto logging
operation by a timer.
Specify the time interval from the start of the data
logging until stopping it.
Setting range Default

Not checked
• When all data loggings When all data
stop loggings stop
• When any of the data
loggings stops
 
1 to 86400 seconds
20 DATA LOGGING FUNCTION
20.11 Auto Logging
20
291