Mitsubishi Electric MELSEC iQ-R Series User Manual page 264

■Specifying the monitored data
For monitoring data, the following devices can be specified.
The data types that can be selected include bit/word (unsigned), word (signed), double word (unsigned), and double word
(signed).
Type
Device Bit device
Word device
Double-word device
*1 An index modified device and indirectly specified device cannot be specified.
*2 For bit devices, digit specification is not supported.
*3 For word devices, bit specification is allowed.
*4 To specify these devices with CPU Module Logging Configuration Tool, use T (contact): TS, ST (contact): STS, C (contact): CS, LT
(contact): LTS, LST (contact): LSTS, and LC (contact): LCS.
*5 The device can be collected by using the CPU module where the SFC function can be used. ( Page 747 Added and Enhanced
Functions)
20 DATA LOGGING FUNCTION
262
20.4 Data Collection Conditions
*1
Device
*2
X, Y, M, L, F, SM, V, B, SB, T (contact)
*4
(contact) , FX, FY, Jn\X, Jn\Y, Jn\SB, Jn\B, BLn\S
*3
T (current value), ST (current value), C (current value), D, SD, W, SW, RD, R, ZR, Z, FD, Un\G, Jn\W, Jn\SW,
U3En\G, U3En\HG
LT (current value), LST (current value), LC (current value), LZ
*4 *4 *4
, ST (contact) , C (contact) , LT (contact)
*5
*4 *4
, LST (contact) , LC