Link Direct Device; Specification Method - Mitsubishi Electric MELSEC iQ-R Series User Manual

27.5

Link Direct Device

This device directly accesses link relays and/or link registers of the network module in the CC-Link IE Controller Network and/
or CC-Link IE Field Network.

Specification method

Specify a link direct device as shown below: The link register 10 (W10) of the network number 2 can be specified as "J2\W10".
Specification method: J†\†
Device No.
• Input
• Output
• Link relay
• Link register
• Link special relay
• Link special register
Network No.1 to 239
For bit devices, digit specification is allowed. (Example: J1\K1X0, J10\K4B0)
From X0
From Y0
B0
From W0
From SB0
From SW0
27 DEVICES
471
27.5 Link Direct Device
27