Mitsubishi Electric MELSEC iQ-R Series User Manual page 612

Error Error name
code
4121H File related error
4122H File related error
4123H File related error
4124H File related error
4125H File related error
4126H File related error
4127H File related error
4128H File related error
4129H File related error
412AH File related error
412BH File related error
412CH File related error
412DH File related error
412EH File related error
412FH File related error
4130H File related error
4131H File related error
4132H File related error
4133H File related error
4134H File related error
4135H File related error
4136H File related error
4137H File related error
4138H File related error
4139H File related error
413AH File related error
413BH File related error
413CH File related error
36 ERROR CODES
610
36.4 List of Error Codes
Error details and cause
• The specified drive (memory) or file does not
exist.
• The specified drive (memory) or file does not
exist.
• The specified drive (memory) is abnormal.
■When CPU Module Logging Configuration Tool is
used
• The data logging was started to the memory
having an error.
• The specified drive (memory) is abnormal.
• The specified drive (memory) or file is performing
processing.
• The specified drive (memory) or file is performing
processing.
• File password mismatch
• File password mismatch with copy destination
• The request cannot be executed since the
specified drive (memory) is ROM.
• The request cannot be executed since the
specified drive (memory) is ROM.
• The specified drive (memory) is write-inhibited.
• The specified drive (memory) is write-inhibited.
• The specified drive (memory) does not have
enough free space.
• The specified drive (memory) does not have
enough free space.
• The drive (memory) capacity differs between the
drive (memory) copy destination and copy
source.
• The drive (memory) type differs between the
drive (memory) copy destination and copy
source.
• The file name of the file copy destination is the
same as that of the copy source.
• The specified number of files does not exist.
• The specified drive (memory) has no free space.
• The attribute specification data of the file is
wrong.
• The date/time data of the engineering tool
(personal computer) is out of range.
• The specified file already exists.
• The specified file is read-only.
• Simultaneously accessible files exceeded the
maximum.
• The size of the specified file has exceeded that of
the existing file.
• The specified file has exceeded the already
existing file size.
• The same file was simultaneously accessed from
different engineering tools.
■When CPU Module Logging Configuration Tool is
used
• An operation was performed to a file being
accessed.
• The specified file is write-inhibited.
Action
• Execute again after checking the specified drive (memory) or
file.
• Execute again after checking the specified drive (memory) or
file.
• Initialize the memory, and restore the drive (memory) to its
normal state.
• Initialize the memory, and restore the drive (memory) to its
normal state.
• Execute again after a while.
• Execute again after a while.
• Execute again after checking the file password.
• Execute again after checking the file password.
• Execute again after changing the target drive (memory).
• Execute again after changing the target drive (memory).
• Execute again after changing the write inhibit condition or
drive (memory).
• Execute again after changing the write inhibit condition or
drive (memory).
• Execute again after increasing the free space of the drive
(memory).
• Execute again after increasing the free space of the drive
(memory).
• Execute again after checking the drive (memory) copy
destination and copy source.
• Execute again after checking the drive (memory) copy
destination and copy source.
• Execute again after checking the file names.
• Execute again after checking the specified data.
• Execute again after increasing the free space of the drive
(memory).
• Execute again after checking the specified data.
• Execute again after checking the clock setting of the
engineering tool (personal computer).
• Execute again after checking the specified file name.
• Execute again after changing the condition of the specified
file.
• Execute again after decreasing file operations.
• Execute again after checking the size of the specified file.
• Execute again after checking the size of the specified file.
• Execute again after a while.
• Execute again after changing the file condition.