File type
File size
Device/label data file for
• 1087398 + S1 + S2 + S3 + S4
S1: N1 142
backing up CPU module
S2: N2 134
data
S3: (N3 + N4 2) 18 + ((M1 16) + M2 + (M3 2) + (M4 + (M4 16) 2) + ((M5 2) + (M5 16) 2) + (M6 8)) 2
S4: 16 + N5 (12 + ((N6 + N7 2) 18) + ((M7 16) + M8 + (M9 2) + (M10 + (M10 16) 2)+ ((M11 2) + (M11 16)
S5: (M13 + M14 + M15) 2
N1: Number of programs
N2: Number of file register files
N3: Number of device types used from M, L, B, F, SB, V, D, W, SW, U3En\HG, Z, LZ, and RD
N4: Number of device types used from T, ST, C, LC, LT, and LST
N5: Number of programs using local devices
N6: Number of local device types used from M, V, D, Z, and LZ
N7: Number of local device types used from T, ST, C, LC, LT, and LST
M1: Total number of points of M, L, B, F, SB, V, and S
M2: Total number of points of D, W, SW, U3En\HG, Z, and RD
M3: Number of points of LZ
M4: Total number of points of T, ST, and C
M5: Number of points of LC
M6: Total number of points of LT and LST
M7: Total number of points of the local devices M and V
M8: Total number of points of the local devices D and Z
M9: Number of points of the local device LZ
M10:Total number of points of the local devices T, ST, and C
M11:Number of points of the local device LC
M12:Total number of points of local devices LT and LST
M13:Module label capacity (words)
M14:Label area capacity (words)
M15:Latch label area capacity (words)
■CC-Link
System file for the iQ Sensor
36 + 20 N bytes (N: No. of devices supporting iQSS whose data has successfully been backed up)
Solution data backup/
restoration function
■Built-in Ethernet
52 + M bytes (M: Backup data file name size
The file name size differs depending on the device supporting iQSS.
Backup data file for the iQ
The size differs depending on the device supporting iQSS.
Sensor Solution data
backup/restoration function
System file for automatic
10 bytes
restoration with the SD
CARD OFF button
*1 Up to 3 bytes are added to the total file size so that the size will be a multiple of 4 bytes.
*2 S4 is added only when local devices are used.
*3 When the number of device points that is assigned to local devices is 0, N5 is 0.
When the CPU module versions are different, a program which can be written to a CPU module with a certain
version may not be written to the one with another version due to overcapacity. In this case, delete the steps
reserved for online program change (default: 500 steps) and write the program to the CPU module.
GX Works3 Operating Manual
*2
+ S5 bytes
2) + (M12 8)) 2)
*1
*3
*1
)
10 MEMORY CONFIGURATION OF THE CPU MODULE
10
155
10.4 Files